If the programme starts but you can't hear water coming in, or it fills very slowly, the problem lies in the water path from the tap to the drum.
Possible causes
- Tap partly closed or low water pressure
- Blocked mesh filter at the hose inlet
- Kinked inlet hose
- Failed water inlet valve (solenoid)
- Faulty water-level sensor or its small tube
Safe first checks you can do
Safety: unplug the appliance and close the water tap before any check, and never open the outer casing or electronic boards yourself.
- Make sure the tap is fully open and water is reaching the house
- Detach the hose and clean the small mesh at its inlet
- Check the hose isn't kinked behind the washer
- On low-supply days, try again once the tank is full
Related parts
Inlet valveInlet hoseWater-level sensorControl board
When do you need a technician?
If pressure is good, the filter is clean and water still won't enter, the valve or its supply from the board needs measuring.
Frequently asked questions
Does a rooftop tank affect filling?
Yes, low tank level or little height difference reduces pressure and may trigger a fill-related error.
Related problems
Beko washer not heatingBeko washer leaking waterBeko washer noisy or vibrating heavilyEError codes – Washers